الشركة المصنعة للأجزاء المصبوبة من البلاستيك: التشكيل بالبثق مقابل التشكيل الحراري

تقدم الشركة المصنعة للأجزاء المصبوبة من البلاستيك التنوع عندما يتعلق الأمر بتقنيات التشكيل. بالإضافة إلى طرق التشكيل الشائعة مثل حقنة  والدوران. هناك نوعان من تقنيات القولبة الأكثر فعالية وهما التشكيل الحراري والقولبة بالبثق.

Both of these techniques offer a number of benefits. They come with their advantages and disadvantages. Although, both techniques offer to end up moulding plastic, but the way they go about it is different. In this article, we are going to talk about the difference between these two techniques.

What a Plastic Molded Parts Manufacturer has to say about these techniques?

Having a basic understanding of both these techniques would help you make a better decision when it comes to choosing a plastic moulding method for your custom plastic parts.

Extrusion Molding

The process of extrusion molding is similar to that of injection molding. However, there is a slight difference, it tends to produce a long continuous shape. In addition, extrusion molding does not use a mold, on the contrary, it uses a die.

To make the parts, the technique squeezes hot raw material via a custom die. To make it easier for you to understand, we can say that it is like squeezing play Doh via a shaped hole. Unlike other molding techniques that put resins into a mould, extrusion puts it directly into the die shape.

So, here the die instead of the mold determines the shape of the desired product.

The Step by Step Process

Step 1: Raw plastic material including powder, pellets, granules are put into a hopper, later the material is shifted into an extruder. It is a hot long cylindrical chamber. To move the material through the chamber, it uses a revolving screw.

There are some extruders more than one revolving screw.

الخطوة 2: There is a spinning screw operating, the raw material flows from the hoppers onto this spinning screw. For the operation of the spinning screw, it uses a horizontal barrel.

الخطوة 3: قم Since every material has different properties, therefore the heating for every raw material is different. The temperature requirement of a certain material is taken into account. To form the desired shape, the molten plastic is passed through the die.

It is the small opening present at the end of the heated chamber.

الخطوة 4: قم For the cooling purposes, the plastic extruded from the die is placed onto a conveyor belt. A plastic molded parts manufacturer can use either air or water for the cooling down purpose.

The process is similar to that of the injection molding. However, instead of the mould, here you would be using a die.

Step 5: It is important to design the die for every individual plastic profile. This would ensure the smooth flow of plastic from the cylindrical profile to the extruder. Thus, taking the final shape.

To ensure that the end product offers integrity, consistency in the flow is imperative.

Extrusion Moulding Common Use

If you want the parts to have a cross-sectional profile, use the extrusion moulding technique. For instance, PVC piping, hoses, and the straws. There is no need for the parts to be round. However, it is vital for them to have the same shape along the part’s length.

When you compare the cost of extrusion molding to other moulding process, you will realize that it is cost-efficient. Mainly because of the die and the machine are simple. They lack the complexity that is innate in molds and machines of other moulding processes.

Since it lacks complexity, thus it has its limitation. You can create only a number of products via this particular technique.

Best Uses of Extrusion Molding

You can design and manufacture parts that are simple and have a fixed cross-sectional profile. For instance, products are either have a circle shape and square.

المنتجات الشائعة

• Plastic Gutters
• PVC pipe
• Plastic Decking
• Straws and Hoses

Thermoforming

Thermoforming is an effective manufacturing process in which the sheet plastic – thermoplastic—is heated to forming temperature. The reason for doing so is to allow the sheet to form the specific shape in the mould.

It later is trimmed to create products. The great thing about thermoplastic sheets is that it comes in a wide range of materials, thickness, finishes, and colors.

To achieve the final product thermoforming does not reply to a certain type of process or a mould. On the contrary, it uses multiple molds along with the different processes to acquire the required shape. For 3D products, it is generally a single 3D mould.

Plastic Mould Parts Manufacturer uses aluminum for the creation of these 3D molds. Since the technique uses less pressure, therefore, it is possible to create parts or components at a lower rate.

Types of Thermoforming

There are two basic types of thermoforming: pressure forming and vacuum forming. Both techniques yield effective results, but there is a slight difference between the two.

Vacuum forming uses pressure and heat to draw the plastic into the respective shape. It first heats the sheet and then places it into the mould. To ensure that the plastic takes the final shape, it is manipulated using the vacuum.

Pressure forming, on the other hand, is similar to a vacuum. However, it has the additional benefit of pressure. With pressure, it is possible to achieve greater details and texture. Therefore, if you have to choose, between the two, pressure forming is the better choice.

Thermoforming Common Uses

Thermoforming, especially the tin-gauge is extremely popular for producing trays blisters, containers, disposable cups, clamshells, lids among other things. It is common among the food as we ass the general retail industry.

For something more sturdy and bigger, manufacturers go with the thick-gauge thermoforming. For instance, it is an effective technique for refrigerator liners, vehicle doors, utility vehicle beds, and dash panels.

Cost and Time of Production

The thermoforming may be an inexpensive plastic moulding technique; however, it does take time. On average, you would need around 8 weeks for the thermoform mold to be ready. After the mold is ready, production starts.

The manufacturing phase is faster. However, do bear in mind that the cost of the technique greatly depends upon the size of the part of the component. For instance, if you want to mold small size parts, it would cost you $20,000 a year.

Whereas, the same amount of parts with a bigger size would cost you $50,000 a year.

You can also check out our article on how to reduce cost per unit.

Plastic Molded Parts Manufacturer Offering the following benefits

Here are the benefits of both Thermoforming as well as the Extrusion molding technique.

Extrusion Molding Advantages

High speed, High Volume

تكون العملية فعالة من حيث التكلفة عندما تريد تصنيع عدد كبير من الأجزاء أو المكونات. يمكنها أيضًا إنتاج الأجزاء بسرعة.

منخفض التكلفة

عندما تقارن قولبة البثق بعدد من تقنيات القولبة الأخرى مثل Rotational ، ستجدها ميسورة التكلفة. ما هو أكثر من ذلك هو أنه يسمح للمنشأة بإعادة استخدام المواد المتبقية ، مما يقلل ليس فقط من نتائج النفايات ولكن أيضًا التكلفة.

الآلة قوية ، يمكنها العمل بشكل مستمر. يمكن للمصنعين الاستمتاع بفترة تصنيع 24 ساعة في اليوم.

المرونة

المنتجات تأتي مع مقطع عرضي متسق ؛ ومع ذلك ، فإنه يوفر قدرًا كبيرًا من المرونة. يمكنك الاستمتاع بعدد من الأشكال والأحجام والقوام من خلال عملية التشكيل بالبثق.

فوائد التشكيل الحراري

القدرة على التكيف

يوفر التشكيل الحراري عددًا من الفوائد ، حيث تتصدر قابلية التصميم للتكيف. توفر هذه التقنية المرونة في دمج جميع احتياجات تصميم المستهلك.

وقت الدوران السريع

بالطبع ، بالنسبة للإنتاج الكامل ، يستغرق القالب بعض الوقت. ومع ذلك ، في حالة النموذج الأولي ، يمكن أن يقدم نتائج فعالة في أي وقت من الأوقات. إنه يوفر انعطافًا سريعًا للوقت.

تحسين المواد

باستخدام التشكيل الحراري ، يمكن تحسين المواد من أجل ضمان انخفاض تكاليف الأدوات وكذلك التصنيع الفعال من حيث التكلفة.

علاوة على ذلك ، تقدم هذه التقنية عددًا من الفوائد الأخرى. ينتج عنه عنصر أو جزء ممتع للغاية من الناحية الجمالية. تقدم الشركة المصنعة للأجزاء البلاستيكية المقولبة مواد بلاستيكية قابلة للطلاء ، وبلاستيك ملون ، إلى جانب العديد من خيارات التخصيص الأخرى.