Schritt für Schritt Anleitung zur Herstellung von Kunststoffwerkzeugen

Die Kunststoffform ist ein Werkzeug für die Hersteller von Kunststoffwerkzeugen  und die Kunststoffformmaschine. Diese Methode bietet verschiedenen Produkten mehrere eindeutige Abmessungen. Anschließend werden einige Formtechniken vorgestellt, die wir im Folgenden erläutern werden.

Was ist Spritzguss? Hersteller von Kunststoffwerkzeugen

The plastic die mould die process is the most common suitable manufacturing method.

It is common for:

• Prototypes
• for bridge tooling and
• for small series production of parts for end users.

The process is based on a mechanism in which thermoplastic or thermosetting polymers are injected into a mold cavity. And then solidify as a finished part. Which is then ejected from the mold.

What are the advantages of die mould manufacturer?

A professional Hersteller will offer rapid injection molding with short processing times. Which helps reduce development risks and limit overall manufacturing costs. Moreover, his automated processes begin with the data being sent directly to the factories.

Damit kann er oft schnelle Prototypen produzieren. Und Teile für Endbenutzer an nur einem Tag. Darüber hinaus haben Hersteller  hochwertiger Aluminium-Spritzgusshersteller eine lebenslange Garantie. Und tragen Sie Hunderte von thermoplastischen Harzen und flüssigen Silikonkautschukmaterialien.

Was ist Kunststoffspritzguss? -  Formenhersteller

Mit dem automatisierten Kunststoffspritzgussverfahren können einzelne Prototypen und Produktionsteile für den Endverbrauch innerhalb von 15 Arbeitstagen oder schneller hergestellt werden. Im Allgemeinen verwendet ein Hersteller  Aluminiumformen. Dies bietet die Vorteile niedriger Werkzeugkosten und beschleunigter Produktionszyklen. Und halten Sie mehr als 100 verschiedene Thermoplaste auf Lager.

The design recommendations for plastic injection molding contain information on the possibilities and limits of the process.

Why is plastic injection molding suitable for your project?

A Formenhersteller works with rapid injection molding. A process that is made possible by the latest technology using automated manufacturing methods. Similarly, CAD models are sent directly to production and the production of the mold begins.

In most cases, the molds are made of aluminum and not steel. However, this is faster and less expensive than milling steel molds.

A professional Formenhersteller thermoplastic injection molding process is a standard process with an aluminum mold without heating and cooling pipes. Which means that cycle times are slightly longer. This allows foundries to monitor:

• injection pressure
• cosmetic issues and the basic quality of the parts

So that they are ready to ship immediately upon completion.

Plastic granulate is loaded into a cylinder. Where it is finally melted, compressed and injected into the channel system of the mold. The hot plastic is shot through the sprues into the mold cavity. And the part is cast in this way.

Furthermore, ejector pins make it easier to remove the part from the mold. Which then falls into a loading container. When the series is complete, the parts will be packed and dispatched immediately. Here you can get our free design cube. Which illustrates the possibilities of injection molding?

How to choose best die mould manufacturer?

A leading Hersteller can provide brass thread inserts if needed for injection molding production. This means that the additional effort for ordering, communicating with suppliers and organizing the timely delivery of the required parts is not necessary.

The risk of delays associated with third-party suppliers is eliminated. And if additional inlays are required due to rejects or quality errors. He will also take this into hand.

Ultimately, it is important to for a Hersteller to offer you a simple and efficient insert service for your injection molding order. Similarly, he will provide parts from his extensive stock and you concentrate on your actual project.

Different types of moulding a plastic die manufacturer offers

Plastic products are supplies that can be found everywhere in daily life. Whether it is daily consumer goods or industrial supplies. However, there are many different production methods.

The following is an introduction to the most common Hersteller von Kunststoffwerkzeugen methods for plastic products. I hope it will help you choose the molding method suitable for your project.

Spritzguss

About 80% of plastic products in daily life are injection molded. Injection molding is produced using an injection molding machine in conjunction with an aluminum mold or a steel mold.

The mold is composed of a core and a cavity. The injection molding machine heats the resin raw material until it melts. Using pressure to inject the molten plastic material into the cavity of the mold. And then the core and cavity are separated. In short product is ejected from the mold.

The advantages of injection molding are the large number:

• fast speed
• low cost, and
• good surface effect.

However, the structural complexity of the injection mold depends on the geometry of the product. The more complex the structure, the higher the cost of the mold.

In addition, the engineering Hersteller von Kunststoffwerkzeugen design of the mold must be refined to prevent defects. And it should optimize product quality and processing speed.

Hersteller von Kunststoffwerkzeugen Rotomolding

Rotational molding is suitable for producing large, hollow or curved products. Such as:

• kayaks or
• sinks for outdoor use.

Because the product is formed under the process of high-temperature rotation and the product is seamless. Moreover, it has higher strength. And the mold is relatively simple and the cost is lower.

The disadvantage is that the mold needs to be repaired after being used thousands of times, and the product quality is average, so it is not suitable for precision products.

Extrusion blow molding

Das Extrusionsblasformen wird üblicherweise zur Herstellung dünnwandiger und kostengünstiger Behälter verwendet. Sowie:

• Einwegbecher oder

Die Produktionsgeschwindigkeit ist extrem schnell. Und der Formenbau ist einfach. Es ist jedoch nicht zur Herstellung komplexer oder hochpräziser Produkte geeignet.

Der erweichte Kunststoff bildet einen Vorformling. Welches ist in zwei offenen und geschlossenen Formen platziert. Nach dem Schließen der Form wird Druckluft zum Aufblasen in den Vorformling geblasen. Bis alle an der Hohlwand haften.

Nachdem die Formwand wassergekühlt ist, werden die Kunststoffteile schnell ausgehärtet. Und dann gibt der Hersteller von Kunststoffwerkzeugen  frei, um das fertige Produkt zu erhalten.

Spritzblasformen - Hersteller von Kunststoffwerkzeugen

Injection blow molding is a process that uses air pressure to inject molten resin into the mold cavity. This process is easier to control and can be repeated. Moreover, it is usually used to produce transparent plastic beverage bottles. The surface effect is very good. But it is not suitable for producing wall thickness. Thicker products.

Reaction injection molding (referred to as RIM )

Reaction injection molding is often used in the automotive industry. Because the products produced by Hersteller von Kunststoffwerkzeugen method have the characteristics of light weight. But hard surface, so they can be made into:

• body parts
• dashboards or
• other parts by painting.

This molding method can only process thermosetting plastic raw materials. The thermosetting plastic raw material undergoes a chemical reaction in the mold. Spreads like a foam. And fills the entire mold cavity. After the chemical reaction ends, the plastic solidifies to become a finished product.

plastic die mould manufacturer Compression molding Technique

Hersteller von Kunststoffwerkzeugen uses compression molding technique for placing the material in the cavity of the die-casting mold after preheating. And curing the plastic by pressure and heat after the mold is closed. This molding method is suitable for producing:

• plastic keys
• gaskets
• O-rings, or
• other soft, easy-to-shape, thin-walled products.

This molding method is relatively cheap and wastes less material. But the stability of the product is more difficult to control. And more attention must be paid during the mold design stage.

Wenn wir Ihnen bei Ihrem Projekt helfen können, rufen Sie uns bitte unter 0086-769-82821468 an oder senden .