精密ハードウェアは、生産ニーズに応じて開くことができます。 その後、ゴングやCNC加工で小さな部品をカットすることができます。 ただし、精密ハードウェアはパンチングのために開いてから溶接し、次に研磨してスプレーする必要があります。 終わった。 研削後、小さな部品も表面にメッキまたはオイルスプレーする必要があることに注意してください。 精密ハードウェア加工部品のバッチ加工には多くの状況があり、精密金属加工の製造方法、サイクル、動作仕様、工程が異なります。 次に、現場作業員向けの精密金属加工技術と動作仕様を紹介します。

精密金属加工技術：

1.処理技術のルートには多くの不確実性があります。 コンポーネントまたは製品には複数のプロセスがあり、製造プロセスには多くの種類の機械および装置と備品が必要です。

2.ハードウェア運用企業は主に分散処理であるため、製品の品質と歩留まりは労働者の技術レベルに大きく依存し、自動化の程度は主にCNC工作機械や柔軟な生産システムなどのユニットレベルにあります。 。

3.製品の部品およびコンポーネントは、通常、自作および外部委託の処理と組み合わされます。 たとえば、電気めっき、サンドブラスト、酸化、シルクスクリーンラジウム彫刻などの特別なプロセスは、外部の製造業者に処理を委託されます。

4. There are many required parts. The workshop site often needs to fill in a lot of picking lists and will see a “figure” production order. If the process is handled, a lot of process transfer orders are also required to be filled.

Precision metal processing operation specifications:

1. When processing products. The operator must maintain a correct posture and have sufficient energy to perfuse the operation. If he is unwell, it is necessary to leave the job immediately for personal safety and report to the workshop supervisor or higher-level leadership. During the operation, it is necessary to gather thoughts, stop chatter and cooperate with each other. Operators must not operate in a state of irritability and tiredness. For personal safety, prevent outbreaks and ensure safe operation. All employees check whether their clothing meets the requirements of the job before entering the job. Never wear slippers, high heels, and clothing that affects safety. Wear hard hats for long hair.

2. Check whether the moving part is filled with lubricating oil before mechanical operation, then start and check whether the clutch and brake are normal, and run the machine idle for 1-3 minutes. Stop the operation when the machine is defective.

3. When the mold is replaced, the power supply should be closed first. The mold movement department can only start to install and debug the mold after the operation is stopped. After the installation and adjustment, move the flywheel by hand to test twice. In order to prevent unnecessary collision between the machine and the product to be processed, it is necessary to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is reasonable. Position.

4. It is necessary to wait for other personnel to leave the machine working area and remove the sundries on the work platform before starting the power to start the machine.

5. During mechanical operation, do not put your hand into the slider operation area, and do not use your hand to pick and place the workpiece. It is necessary to use things that conform to the specifications when taking and placing the workpiece in the die. If you find any abnormal noise or malfunction of the machine, you should immediately close the power switch for inspection. After the machine is started, one person can carry materials and operate the machine. Others must not press the power building or step on the foot switch board. For the safety of others, do not put their hands in the machine’s work area or touch the moving parts of the machine with their hands.

The above is a detailed introduction of the precision metal processing technology and operating specifications summarized by Tongyang CNC. Small hardware products made by precision hardware are not final consumer goods, but are used as supporting products for industrial production, and there are also some semi-finished products. As long as a small number of precision hardware products are east-west consumer goods. Such as: screws, screwdrivers, wrenches, fishing tackles, etc. Precision hardware accessories are machine parts or components made of precision hardware, or some small hardware products, which can be used alone or as auxiliary appliances.

私たちはあなたのプロジェクトのお手伝いをすることができた場合は、下記にご連絡ください0086-769-82821468または電子メールsales@kaitomould.com.